(We don’t recommend titanium-coated needles.) Call our toll free number at 800.426.7233 to order. APQS carries the correct type of needle for your machine in each of these sizes. Try a new needle if you have trouble with thread breakage and are using the correct size for your project. For very thin thread, you may switch to an MR 3.5 (size 16), and you can increase the size to an MR 4.5 (20) for heavy, thick thread. This needle has a large eye and can withstand the flexing that happens when you move the machine (over-flexing can cause directional tension changes.) If you use a needle that does not have a large enough eye for the thread thickness or type, the eye will fray or slice the thread. Incorrect or damaged needleĪPQS times each machine to an MR 4.0 industrial needle (equivalent to a size 18). Click here for information on threading your machine. Re-thread the machine by completely removing the thread from the machine, and then starting over with the cone and first thread guide. Don’t worry, we’ll help you figure it out! Here are different causes for thread breakage, along with solutions: Improper threadingĭouble check the thread path and ensure the thread isn’t catching on the spool, laser cord, or other obstruction. Successful thread use requires being willing to make adjustments to the tension, both on the top as well as to the bobbin. APQS machines can sew with nearly every type of thread, from 100-weight silk to 12-weight heavy cotton. Few things can be more frustrating than thread that constantly breaks.

Swf embroidery machine thread breaks